Office en bois partition mobile insonorisée

The middle of the operable moveable partition is made of sound insulation cotton and other materials, and the surrounding frame is made of aluminum alloy material, and the sound insulation effect is as high as 53dB coefficient, which can isolate the noise of ordinary speech.

The sound insulation coefficient of the partition comes from multiple directions, not only in the partition wall itself, but also in other links, as shown below:

1. Horizontal sound insulation

In order to achieve the best sound insulation effect, the structure of the upper and lower layers of sound insulation rubber is adopted. Using the mechanical principle of the jack, the double-layer rubber strip is tightly pressed on the track of the ceiling and the bottom of the partition fan to provide a high-stability movable partition.

2. Corner sound insulation

The use of specially made rubber for the corner components solves the technical problem of corner sealing; at the same time, this method also achieves superior stability and sound insulation.

3. Vertical sound insulation

All soundproof walls are made of particularly elastic vertical sealing sides, with concave and convex grooves closely matching to ensure the best closure and sound insulation effect.

4. Skeleton

The hanging structure based on the wall panels allows it to sway freely and freely. The metal hoops between the wall panels are closely combined with each other, which effectively blocks the transmission of sound. The partition door panel can be replaced as needed according to the interior design without destroying the entire operable moveable partition.

5. Sound insulation materials

Additional sound insulation materials are sandwiched in the partition walls to achieve different sound insulation effects.